FullSpeedRC is doing their own toothpick (thx Kabab for the original idea ;)) For 126$ you will get a tiny rocket !

For this version it seems that FullSpeedRC created a new FC+ESC board to handle the 1103 motors (8000kv) with a 2/3S LIPO. I like their good vtx that will be really good for outside and some bando too. I will review it quickly so I will post more information later about it !


  • Weight: 41.5g (without battery)
  • Flight controller: FSD412(F411 2-3S FC) 5V 2A BEC built-in OSD
  • ESC: FSD412(1-3S ESC) BLHELI_S 4in1 ESC Dshot600
  • Motor: 1103 8000KV with connector
  • Propeller: 65mm 2-blades props, 1.5mm hole
  • Camera: Caddx Micro F2 camera with angle adjustable(0°- 45°)
  • VTX: FSD TX600 Pit/25/100/200/400/600 switchable VTX(support IRC Tramp)

FullSpeed FSD412 (F411 FC) Flight controller

  • Size: 20mm x 20mm x 5mm
  • Mounting hole: 16mm x 16mm
  • MCU: STM32 F411
  • BEC: 5V/2A
  • Input Voltage: 2-3S Lipo or 2- 3S HV Lipo
  • Built-in Betaflight OSD

FullSpeed FSD412 (1-3S ESC)BLHELI_S 4in1 ESC

  • Size: 20mm x 25mm x 5mm
  • Mounting hole: 16mm x 16mm
  • Firmware: BLHELI_S
  • Input Voltage: 1-3S Lipo or 1- 3S HV Lipo
  • Continuous current: 12A
  • BEC Ouput: NO

FullSpeed FSD TX600 25mW-600mW VTX FPV Transmitter

  • Output power: PIT/25mW/100mW/200mW/400mW/600mW switchable
  • Control mode:BFOSD control(support IRC Tramp)/button
  • Video system: NTSC/PAL
  • Antenna: IPEX
  • BAT: 5V Recommended
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
  • Size: 2626mm(LW),Hole:20*20mm
  • Weight: 2.3g

What do you have in the box ?

  • 1 x Toothpick frame kit
  • 1 x FSD412 2-3S 12A Flight tower
  • 4 x 1103-8000KV brushless motor with connector
  • 2 x 65mm 2-blade propeller(CW)
  • 2 x 65mm 2-blade propeller(CCW)
  • 1 x Caddx Micro F2
  • 1 x FSD TX600 25mW-600mW VTX FPV Transmitter